Product Name: Chinese Supplier Uns N08800 Incoloy 800 Alloy Bar/Rod Model NO.: incoloy 800 Special Use: Forged Alloy: Alloy Surface Treatment: Polished Application: Die Steel Bar Technique: Forged Standard: AISI, ASTM, GB, JIS, DIN, BS, Can Be Customized Type: Incoloy Alloy 800 Grade: 800/800h/800ht Trademark: Bozhong metal Group Transport Package: Sea and Air Origin: China HS Code: 7222200000 Product Description IntroductionIncoloy alloys belong to the category of super austenitic stainless steels. These alloys have nickel-chromium-iron as the base metals, with additives such as molybdenum, copper, nitrogen and silicon. These alloys are known for their excellent strength at elevated temperatures and good corrosion resistance in a variety of corrosive environments.Incoloy alloy 800 is an alloy of nickel, iron and chromium. The alloy is capable of remaining stable and maintaining its austenitic structure even after long time exposures to high temperatures. Other characteristics of the alloy are good strength, and high resistance to oxidizing, reducing and aqueous environments. The standard forms in which this alloy is available are round, flats, forging stock, tube, plate, sheet, wire and strip.This datasheet will look into the chemical composition, properties and applications of Incoloy 800.Chemical compositionThe chemical composition of Incoloy alloy 800 is given in the following.Element content (%)Iron, Fe≥39.5Nickel, Ni30-35Chromium, Cr19-23Manganese, Mn≤1.5Other remainderPhysical propertiesThe following table discusses the physical properties of INCOLOY alloy 800.Properties metric imperialDensity 7.94 gm/cm30.287 lb/in3Mechanical propertiesThe mechanical properties of INCOLOY alloy 800 are as below.Properties metric imperialTensile strength (annealed) 600 MPa87 ksiYield strength (annealed) 275 MPa39.9 ksiElongation at break 45%, 45%Other designationsSome of the designations used to denote Incoloy alloy 800 are listed below:UNS N08800AMS 5766AMS 5871ASTM B163ASTM B366ASTM B407ASTM B408ASTM B409ASTM B514ASTM B515ASTM B564DIN 1.4876FabricationMachinabilityMachining characteristics of this Incoloy alloy 800 are similar to that of iron-based alloys. This alloy tends to work-harden during machining.WeldingIncoloy alloy 800 can be welded by common welding techniques, using a matching filler metal.FormingThis alloy exhibits good ductility and hence can be formed using conventional methods.Hot workingIncoloy alloy 800 can be hot worked at temperature ranges of 871-1232°C (1600-2250°F).Cold WorkingCold working may be done on the alloy using standard tooling.AnnealingIncoloy alloy 800 may be annealed after cold working. Annealing should be done at 982°C (1800°F) for 15 min and then the alloy should be air cooled.ApplicationsIncoloy alloy 800 is used in the following applications:Heat exchangersCarburizing equipmentHeating elementsSheathing and nuclear steam generator tubing.ORMSpecificationSupply formOthersSheetThickness: 0.40-4.75mmGeneral width: 1000, 1219, 1500mmwhole coil or piece of itcold annealed, surface 2B, 2EPlateThickness: 4.76-60mmWidth: 1500, 2000, 2500mmLength: 3000, 6000, 8000, 8500mm (under 10mm plate can be coiled)whole coil or piece of itsingle hot rolling, solid solution annealed state, surface 1DBeltThickness: 0.10-3.0mmWidth: 50-500mmwhole coil or specified sizecold annealed, surface 2B, 2EBar and rodRolled bar: Φ5-45mmLength: ≤1500mmpolished bar (circle, square)solutionannealing, decalingForged bar: Φ26-245mmLength: ≤4000mmWeld tubeOuter diameter: Φ4.76-135mmWall thickness: 0.25-4.00mmLength: ≤35000 mmbase on your requirementuse for PHESeamless tubeOuter diameter: Φ3-114mmWall thickness: 0.2-4.5mmbase on your requirementuse for PHEWireOuter diameter: Φ0.1-13mmbase on your requirementNi and Ni alloy, Ti and Ti alloyForged pieceroundness and square alloybase on your requirementsteel, alloyFlangesall kinds of flangesbase on your requirementsteel, alloyWelding materialsCoil wire: Φ0.90/1.2/1.6mmbase on your requirementCertificate of origin: America, Sweden, Britain, Germany, Austria, Italy, France.Straight wire: Φ1.2/1.6/2.4/3.2/4.0mmWelding rod: Φ2.4/3.2/4.0mmTubeelbow, three links, four links, different diameter sizebase on your requirementNi and Ni alloy, Ti and Ti alloyExplosive bonded laminateRaw sheet thickness: ≥2mmbase on your requirementNi and Ni alloy, Ti and Ti alloy
Trading Company
