Ful- Automatic Disposable Medical Face Mask Medical Equipment Surgical Face Mask Machine

Product Name: Ful- Automatic Disposable Medical Face Mask Medical Equipment Surgical Face Mask Machine Logo Printing: Without Logo Printing Group: All Quality Guarantee Period: Two Years Ethylene Oxide Sterilization: Ethylene Oxide Sterilization Material: Non-Wooden Fabric, Melt Blown Fabric Type: Surgical Supplies Materials Yield: Sufficient Trademark: JG Transport Package: Wooden Case Specification: 200*3500*1980mm Origin: Shenzhen HS Code: 63079000 Product Description Brief IntroductionThe fully automatic one-to-two mask machine is connected with a mask body machine and a diverter, which is connected through the diverter and the earband fusion splicer. After the machine starts, the mask body machine produces the product and transfers it to the conveyor belt. On the shunt machine, the earmuff part is welded by transferring the mask from the shunt machine to the earband welding machine to complete a complete mask finished product. The entire process realizes a fully automated production process without manual operation, that is, one body machine and two ear Belt-connected, the output can reach 100-120 pieces / minute.Built-in anti-deformation and anti-traveling devices ensure stable and reliable, 100% qualified input all dayPreset quantitative integrated output, neatly stacked, never scattered, sanitary and reliable.Full automatic face mask machine operation procedure:1. Place each tray on the unwinding rack and manually pull it into the equipment.2. Adjust the position of each tray.3. Turn on the mainframe and the super-welding machine.4. Fully automatic face mask machine first checks whether the folding position is ready.5. Adjust the placement of the aluminum bar to make it synchronized with the welding mold.6. Check if the working position of the shaping roller can guarantee the normal working needs.7. Full-automatic flat mask machine appropriately adjusts the pressure of the welding roller to make the two ends weld firmly.8. Adjust the cutter position to ensure accurate cutting position on the product.Repair and maintenance of automatic face mask machine:1. The equipment should regularly check the main parts, such as the working condition of the bearing to be cut off by welding, and properly fill the lubricant to ensure its normal work.2. Regularly check the wear of the welding, adjust its pressure appropriately, and reduce the pressure to a small level while ensuring the welding.3. The tension of each unwinding tray should be checked in time to meet production needs.4. The pressure of the cutter is appropriate, otherwise it may easily lead to situations such as cutting.Precautions for automatic face mask machine:1. The ultrasonic welding machine should be turned on before the host machine is turned on to avoid overheating the ultrasonic welding machine.2. When the main machine is turned on, first manually pull each raw material into the welding mold to make it normal production.3. The pressure of each component (such as welding and cutting) should be adjusted appropriately to reduce the load of the whole machine.4. Each bearing should be checked regularly to ensure normal operation.Full automatic face mask machine parameters:Product model: KSD-08Machine size: 4100 * 4100mm * 1780mm (including conveyor)Driving method: servo motor and stepping motorFull automatic face mask machine control panel: human-machine interface (touch screen) and buttonsVoltage: 220VFrequency: 50 60HzAir pressure: 0.5-0.8MPa clean without water and oilOutput of full-automatic face mask machine: 100-110 pieces / minutePower: 3.5KWUltrasonic power: 1500W * 9 setsUltrasonic frequency: 20KHzMachine weight: 1500KG