Horizontal Multi Stage Pump (D)

Product Name: Horizontal Multi Stage Pump (D) Model NO.: D Certification: ISO Position of Pump Shaft: Horizontal Type: Desktop Pressure Medium: Water Capacity: 6 - 500 M3/H Head: 33 - 960m Drive Power: 2.2 - 180kw Speed: 980, 1480, 2950 R/Min Calibre: 50 - 150mm Temperature Range: -15degree - +80degree Trademark: SUHUA Transport Package: Export Wood Case Specification: ISO Origin: China HS Code: 84131900 Product Description Capacity: 6 - 500 m3/hLift Head: 33 - 960mDrive Power: 2.2 - 180kwRotary Speed: 980, 1480, 2950 r/minCalibre: 50 - 150mmTemperature range: -15degree - +80degreeApplication:1. Daily and fire water supply for high-rise2. Water supply and discharge in mines3. Cyclic pressurization, air-conditioning system.Type DDYDFDM multistage Pump is single-suction, multi-stage, segmental centrifugal pump. Type D It is provided for delivering clear water without solid particles or other liquid which is physically and chemically similar to clear water.The temperature of the liquid is -20degree~ 80degree...Type DY is used to transfer non-corrosive oil and oil products without solid particles and with viscosity less than 120 centistokes. The temperature of the liquid is -20degree~ 150degrees. Type DF is used to transfer corrosive liquid without solid particles, The temperature of the liquid is --20~+150degrees. Type DM is used to transfer clear water or liquid which is physically and chemically similar to clear water with limited solid particlesConstruction:Type DDYDFDM pumps are horizontally installation. The direction of inlet and outlet of Type DYDF is vertical upward except type D pump with horizontal inlet. Type DYIIIIIIDF can be also with horizontal inlet and outlet.The axial thrust gets balanced with the help of balance disk. Type D, DY, DF3_40 pumps get the balanced with the help ofSymmetrically constructionThe shaft seal usually uses packing seal, according to customers' requirements, mechanical seal is used, too. Type DF85_67pumps use sliding bearings which get lubricated with dilute--oil.The others use rolling bearings which get lubricated with grease except type DF85-67 pump with dilute oil.Materials of tolerance parts: Type D pump are made of cast iron, the shaft is 45# steel.Type DY: The materials are divided into three types: I - cast iron(the temperature in operation is 20--150degrees)II_cast steel (the temperature in operation is 45--400degrees)III_stainless steel (the temperature in operation is 45--400degrees)Type DF: According to the liquid can be divided into cast steel and stainless steel.Type DM: Anti-friction cast ironDescription of pump type:For example D(DYDF, DM)IIIIII85--67x8D-- multistage centrifugal PumpD-- multistage centrifugal Pump for boiler feedDY_multistage oil pumpDF-- multistage anti-corrosive pumpDM-- multistage anti-friction pumpIIIIII_code of materials85capacity(m3/h)67head of each stage8number of stage, total head is 67x8=536(m).