Product Name: Ship Lifting and Launching Inflatable Marine Airbag Model NO.: XC20160517001 Condition: New Customized: Customized Application: Salvaging, Ship Launching And Ashoring, Cargo Carrying Standard: CB/T3795 Color: Black Quality: World Class Faction: Ship Launching or Landing Material: Nature Rubber Marine Parts: Ship Launching Airbag Layer: From 4 to 10 Trademark: XINCHENG Transport Package: Tray Specification: Diameter0.5-3.5m Origin: Qingdao HS Code: 4016950000 Product Description 1. INTRODUCTIonMarine Rubber Airbag is china independent intellectual property rights of innovative products, the products are mainly applied to shiplaunching and landing, weight liftingand moving, installation of underwater buoyancy aidto salvage sunken vesselsetc.Airbags launching technology was developed based on traditional slipway launching mode, it overcomes the restrictions of traditional slipway launching mode. Our marine rubber airbags are less limited by space, no large mechanical equipment, can shorten the working periodand save the unnecessary cost.Through years of development practice, our products arebecome more safety, effectiveandgreen environmental protectionand they can launching a ship up to 100,000 DWT. Nowadays, Marinerubber airbagsare widely used in the world. 2. AIRBAG STRUCTURE & MATERIAL REQUIREMENTS2.1 Airbag Structure "XINCHENG" Marine Rubber Airbags' structure isconsistsof the outer rubber layer synthetic cord reinforced rubber layersand inner rubber layer. Its shape characteristics: central body cylindrical + tapered on both ends.Cord layers: 4,5,6,7,8,9,10, layers Accessories: Pressure gage, Inlet valve, Pipe fitting and seal end ring. 2.2 Material Choose the best quality of imported natural rubber, such as smoked sheet rubber and 3L natural rubber from Thailand and Malaysia, which has good elasticity, ageing resistance, and will not take off layer. Meanwhile, During the process of produce rubber, we using efficient stabilizer to make rubber more environmentally friendly and no cracks. NoTest item Required valueTest method1Tensile strength,MPa≥18ISO 372Elongationat break, %≥400ISO 373Hardness, °(Shore A) 60±10ISO 7619-14Tear Strength, N/cm≥400ISO 34-15Compression set, %(70ºC±1ºC, 22h)≤30ISO 815-16After thermal ageing at 70ºC±1ºC, 96hHolding of pull lengthening, %≥80ISO 1887Holding of elongation at break, %≥80ISO 1888Change of hardness,°(Shore A)≤8ISO 7619-19Static ozone aging testat 40ºCx96h[ozone concentration(50±5)x10-8],extension 20%No crackISO 1431-12) Our marine rubber airbags' material using three strands synthetic-tyre-cords whose tensile strength can be 31 KG, which make our airbags more higher bearing capacity and safety. Figure 2. Synthetic-tyre-cord Wrap threads that run vertically through the synthetic tyre-cord pattern. Weft threads that run perpendicular to the warp threads. 3.SIZE AND SPECIFICATIonStandard size of Marine Rubber Airbags: Diameter (D): 0.8m-2.0m Effective length (EL): 6.0m-18m Total Length (TL): 7m-20m Cord layers: 4,5,6,7,8,9,10, layers Diameter(m) 1.01.21.51.82.0Medium Pressure (4-5) Test Pressure 0.14-0.160.12-0.140.10-0.120.08-0.100.07-0.09Working Pressure 0.12-0.140.10-0.120.08-0.100.07-0.090.06-0.08High Pressure(6-8) Test Pressure 0.22-0.260.20-0.240.15-0.200.13-0.160.12-0.15Working Pressure 0.20-0.240.17-0.220.13-0.180.11-0.140.10-0.13NOTE: Other size of airbags are also available follow customer's request. 4.PACKAGING AND SHIPMENTPackaging: All of airbags can be folded and then bundled up.Storage: When the airbags are not to be used for a long period of time, they should be drained,cleaned,dried,filled with talc powder, and the exterior surfaces should be coated with talc powder. The airbags should be maintained in a dry,ventilated room and be protected from light. The airbags should be stored in a relaxed condition free from tension,compression or other deformation. The airbags should be kept away from any heat source. The airbags should be protected from acids, alkalis, oils or organic solvents.
