Waterproof DC24V/12V Waterproof LED DMX Driver

Product Name: Waterproof DC24V/12V Waterproof LED DMX Driver Usage: Light Output Type: DC12/24V Driving Method: LED Regulator Voltage Circuit Structure: Electronic Step-down Transformer Waterproof: IP67 Power: 150W Voltage: DC12V/24V Pf: 0.9 Efficiency: 0.8-0.85 Lifespan: 50000h Certificate: CE&RoHS Warranty: 2 Years Trademark: SUNSHINE Transport Package: Cartons Specification: CE and ROHS Origin: Shenzhen, Guangdong HS Code: 9405409000 Product Description 150W waterproof led driver, DC12V /24V IP67 waterproof led driver, 150w LED Adapter, 150w Waterproof led power supply, DC12V led power supply, IP67 led adapter. Waterproof led driver

Feature:

IP67 design for indoor or outdoor installations

Protections: Short circuit / Overload/Over temperature

Cooling by free air convection

100% full load burn-in test

Suitable for LED lighting

Products through CE, RoHS Certification

2 years warranty

MODEL		12V150W		24V150W
DC VOLTAGE	12V		24V
RATED CURRENT	12.5A		6.25A
CURRENTRANGE	0~12.5A		0~6.25A
RATED POWER	150W		150W
NOTE.2 RIPPLE & NOISE (max.)	150mV		150mV
NOTE.3 VOLTAGE TOLERANCE	±4%		±2%
SETUP, RISE TIME	80ms/220VAC
HOLD UP TIME (Typ.)	60ms/220VAC
VOLTAGERANGE	170~ 250VAC
FREQUENCYRANGE	50~ 60Hz
POWER FACTOR (Typ.)	PF>0.6/220VAC
EFFICIENCY (Typ.)	80%		82%
AC CURRENT (Typ.)	1.42A/220VAC
INRUSH CURRENT (Typ.)	COLDSTART50A/220VAC
Short circuit	Protection type :  recovers automatically after fault condition is removed
Overload	overload protected @ 145-160% above peak rating
Over temperature	Protection type : Shut down o/p voltage, re-power on to recover
WORKING TEMP.	-30 ~ +50(Refer to output load derating curve)
WORKING HUMIDITY	20 ~ 99% RH non-condensing(Waterproof)
STORAGETEMP.,HUMIDITY	-40 ~ +80, 10 ~ 99% RH
SAFETY STANDARDS	CE Mark(LVD)  ,  IP67
WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC   I/P-GND:1.5KVAC
EMC TestStandards	EN55015:2006; EN61547:1995+A1:2000; EN61000-3-2:2006; EN61000-3-3:1995+A2:2005; EN61347-1:2001; EN61347-2-13:2006
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25of ambient temperature.   2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 10uf parallel capacitor.   3. Tolerance : includes set up tolerance, line regulation and load regulation.